Telecom Tower Battery

CommunicationPort

RS485 or RS232

To show the battery voltage, temperature, SOC,
Faults alarming and so on

Cell voltage alarming

High voltage larming

3750±20 mV ( can be set)

High voltage larming release

3600±20 mV ( can be set)

Low voltage larming

2800±20 mV ( can be set)

Low voltage larming release

3000±20 mV ( can be set)

Over charge Protection

Over charge detection voltage

3800±20 mV ( can be set)

Over charge release voltage

3600±20 mV ( can be set)

Release condition

The cell voltage is up to the release voltage
or with discharge curent ≥1A

Over discharge protection

Over discharge detection voltage

2500±50 mV (can be set)

Over discharge detection delay time

5 ±1S (can be set)

Over discharge release voltage

2800±50 mV(can be set)

Release condition

With charge current >1A or grid recover

Over current protection

Max. charge current

100±1A (can be set, 0A~100A )

Over charge current detection current

110±1A (can be set, 0A~110A )

Over charge detection delay time

5±1S (can be set, 1S~600S )

Max. discharge current

-100±1A (can be set, 0A~100A )

Over discharge current detection current

-110±1A (can be set, 0A~110A )

Over discharge detection delay time

5±1S (can be set, 1S~600S )

Release condition

Detect every 1 min and the current less than protection current, or detect discharge current

Cells balancing

Balancing voltage

3450 mV(can be set, 3000mV-4500mV)

Balancing voltage different

50mV(can be set, 50mV-100mV)

Balancing end voltage

30mV(can be set, 10mV-30mV)

Temperature Protection

High temperature alarm

60±3℃(can be set, -20-60℃)

High temperature protection

65±3℃(can be set, -20-65℃)

Low temperature alarm

-10℃±3℃(can be set, -20-60℃)

Low temperature protection

-20℃±3℃(can be set, -20-60℃)

Low temperatureheating

Optional(no for standard type if no request)

Bat_Volt:51. 16V
Bat_Curt:0.00A
Rem_Capt: 70.71Ah
Sys_Stat: Standby

Picture 2:
To show the battery voltage, current, SOC and status.
Press “setting”, turn to Interface 2nd to set all the parameters;
The “return” do not work;
Press “page down”, turn to Interface 3rd;
Press “page up”, turn to Interface 7th

Cycles : 35Ah
Amb_TemP: 19.3℃
Pow_Temp: 26.7℃
AlarStat: None

Picture 3:To show the battery used capacity, ambient temperature, power temperature and the BMS alarming status.
Press “setting”, turn to Interface 8th to set all the parameters;
The “return” do not work;
Press “page down”, turn to Interface 4th;;
Press “page up”, turn to Interface 2nd

Cel_Volt mV 01~08
3342 3343 3345
3343 3344 3343
3345 3346

Picture 4:To show the voltage from B1-B8.
Press “setting”, turn to Interface 8th to set all the parameters;
The “return” do not work;
Press “page down”, turn to Interface 5th;;
Press “page up”, turn to Interface 3rd

Cel_Volt mV 09~16
3345 3345 3346
3346 3345 3345
3345

Picture 5:To show the voltage from B9-B15.
Press “setting”, turn to Interface 8th to set all the parameters;
The “return” do not work;
Press “page down”, turn to Interface 6th;;
Press “page up”, turn to Interface 4th

Cel_TemP℃ 01~04
17.6 17.2
17.6 17.6

Picture 6:To show the temperate from 1 to 4
Press “setting”, turn to Interface 8th to set all the parameters;
The “return” do not work;
Press “page down”, turn to Interface 7th;;
Press “page up”, turn to Interface 5th.